Users Guide

Dell EMC Networking CLI 202
Auto-Install
application start Schedules a Dell-supplied application for
immediate execution on the stack master.
GC
application stop Stops a Dell-supplied application if the
application is executing on the stack master.
GC
show application Displays installed applications and optionally
displays application files.
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host auto-reboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host auto-save Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retry-count Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
show boot Displays the current status of the Auto Config
process.
PE
Command Description Mode
a