Users Guide

Switch Management Commands 2066
Example
The following example specifies a password “mcmxxyyy” on a line.
console(config-line)# password mcmxxyyy
show line
Use the show line command to display line parameters.
Syntax
show line [console | telnet | ssh]
• console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User Exec and Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)#show line
Console configuration:
Serial Port Login Timeout (mins) (secs)........ 10 minutes 0 seconds
Baud Rate (bps)................................ 9600
Character Size (bits).......................... 8
Flow Control................................... Disable
Stop Bits...................................... 1
Parity......................................... none
History:....................................... 10
Telnet configuration:
Remote Connection Login Timeout(mins)(secs).... 10 minutes 0 seconds