Users Guide

Switch Management Commands 2102
Syntax
show rmon history index [throughput | errors | other] [period seconds]
• index — The requested set of samples. (Range: 1–65535)
• throughput — Displays throughput counters.
• errors — Displays error counters.
• other — Displays drop and collision counters.
• period seconds — Specifies the requested period time to display.
(Range: 0–2147483647)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the significant fields shown in the display:
Field Description
Time Date and Time the entry is recorded.
Octets The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS
octets).
Packets The number of packets (including bad packets) received during this
sampling interval.
Broadcast The number of good packets received during this sampling interval that
were directed to the Broadcast address.
Multicast The number of good packets received during this sampling interval that
were directed to a multicast address. This number does not include
packets addressed to the Broadcast address.
% The best estimate of the mean physical layer network utilization on this
interface during this sampling interval, in hundredths of a percent.