Users Guide

Switch Management Commands 2176
SNMP Commands
The SNMP component provides a machine-to-machine interface for the Dell
EMC Networking product family. This includes the ability to configure the
network device, view settings and statistics, and upload or download code or
configuration images. The agent includes a get-bulk command to reduce
network management traffic when retrieving a sequence of Management
Information Base (MIB) variables and an elaborate set of error codes for
improved reporting to the network control station.
The extensible and advanced design of the Dell EMC Networking SNMP
makes adding remote manageability to networked devices undemanding. The
agent allows a network control station to retrieve reports from the networked
device. These reports are based upon the defined objects in the MIB. The
agent queries, reports, and sets MIB variables based upon directions from the
network control station or upon preset conditions.
Dell EMC Networking supports IPv4 and IPv6 SNMP access. Management
access may be restricted to individual IPv4 and IPv6 management stations for
management access and traps/informs. Management access may also be
restricted to an IPv4 or IPv6 subnet.
show snmp
Use the show snmp command to display the SNMP communications status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.