Users Guide

Switch Management Commands 2251
The falling-threshold-val should be configured to be less than or equal to the
rising-threshold-val.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config)#buffers rising-threshold 90
clear checkpoint statistics
Use the clear checkpoint statistics command to clear the statistics for the
checkpointing process.
Syntax
clear checkpoint statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
When nonstop forwarding is enabled on a stack, the stack's management unit
checkpoints operational data to the backup unit. If the backup unit takes over
as the management unit, the control plane on the new management unit uses
the checkpoint data when initializing its state. Checkpoint statistics track the
amount of data checkpointed from the management unit to the backup unit.
Example
console#clear checkpoint statistics
clear counters stack-ports
Use the clear counters stack-ports command to clear the statistics for all
stack-ports.