Users Guide

Layer 2 Switching Commands 493
Command Mode
Global Configuration
User Guidelines
This value is applied globally on all interfaces on the stack. LPI history is only
collected on combo ports when the copper port is enabled. Use the no form of
the command to set the sampling interval or max-samples values to the
default.
Examples
Use the command below to set the EEE LPI History sampling interval to the
default.
console(config)# no green-mode eee-lpi-history sampling-interval
Use the command below to set the EEE LPI History max-samples to the
default.
console(config)#no green-mode eee-lpi-history max-samples
show green-mode interface-id
Use the show green-mode interface-id command to display the green-mode
configuration and operational status of the port.
Syntax
show green-mode interface-id
• interface-id —An Ethernet interface identifier. See Interface Naming
Conventions for interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes