Users Guide

Table Of Contents
Port Characteristics 697
Configuring Green Features
Use the following commands to configure and monitor energy-saving features
for the ports and the switch. EEE capability requires auto-negotiation to be
enabled.
Command Purpose
configure Enter Global Configuration mode.
interface
interface
Enter interface configuration mode for the specified
interface. The
interface
variable includes the interface type
and number, for example gigabitethernet 1/0/3.
A range of interfaces can be specified using the interface
range command. For example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
green-mode energy-
detect
Enable energy-detect mode on the interface.
green-mode eee Enable EEE low power idle mode on the interface.
exit Exit to global configuration mode.
green-mode eee-lpi-
history {sampling-
interval
seconds
| max-
samples
max
}
Configure the global EEE LPI history collection interval
and buffer size.
exit Exit to Privileged Exec mode.
show green-mode
interface
View green mode settings for the specified port.
show green-mode eee-
lpi-history interface
interface
View the EEE LPI history statistics for the specified port.