Administrator Guide

Dell EMC Networking CLI 113
Ethernet CFM
show storm-control action Displays the storm control action configuration
for one or all interfaces.
PE
shutdown Disables interfaces. IC
speed Configures the speed of a given Ethernet
interface when not using auto-negotiation.
IC
switchport protected Sets the port to Protected mode. IC
switchport protected name Configures a name for a protected group. GC
show switchport protected Displays protected group/port information. PE
show system mtu Displays the configured MTU. PE
system jumbo mtu Globally configures the Maximum Transmission
Unit (MTU) on all interfaces for forwarded and
system-generated frames.
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ethernet cfm domain Enters into maintenance domain Configuration
mode for an existing domain. Use the optional
level parameter to create a domain and enter
into maintenance domain Configuration mode.
GC
service Associates a VLAN with a maintenance domain. MDC
ethernet cfm cc level Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
GC
ethernet cfm mep level Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
IC
ethernet cfm mep enable Enables a MEP at the specified level and
direction.
IC
ethernet cfm mep active Activates a MEP at the specified level and
direction.
IC
ethernet cfm mep archive-
hold-time
Maintains internal information on a missing
MEP.
IC
Command Description Mode
a