Administrator Guide
Layer 3 Routing Commands 1430
ipv6 prefix-list apple:
count: 6, range entries: 3, sequences: 5 - 30, refcount: 31
seq 5 deny 5F00::/8 le 128 (hit count: 0, refcount: 1)
seq 10 deny ::/0 (hit count: 0, refcount: 1)
seq 15 deny ::/1 (hit count: 0, refcount: 1)
seq 20 deny ::/2 (hit count: 0, refcount: 1)
seq 25 deny ::/3 ge 4 (hit count: 0, refcount: 1)
seq 30 permit ::/0 le 128 (hit count: 240664, refcount: 0)
clear ip prefix-list
To reset the IPv4 prefix-list counters, use the clear ip prefix-list command.
Syntax
clear ip prefix-list [list-name | list-name network mask]
• list-name—(Optional) Name of the prefix list from which the hit count is
to be cleared.
• network— (Optional) Network number. If this option is specified, hit
counters are cleared only for the matching prefixes.
• mask—Required if a network is specified. The network mask in dotted-
quad notation. In dotted-quad notation, the 1 bits must be contiguous
and left justified.
Default Configuration
No prefix lists are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration sub-
modes
User Guidelines
This command is used to clear prefix-list hit counters. The hit count is a
value indicating the number of matches to a specific prefix list entry. The
counters are also cleared by the global clear counters command.
Command History
Introduced in version 6.2.0.1 firmware.