Administrator Guide

Layer 3 Routing Commands 1520
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip policy
Interface Route map
Vl10 pbr-map
show ip protocols
Use the show ip protocols command to display a summary of the
configuration and status for each unicast routing protocol. The command
lists all supported routing protocols, regardless of whether they are currently
configured or enabled.
Syntax
show ip protocols [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.