Administrator Guide

Layer 3 Routing Commands 1716
• summary — Display the LSA database summary information.
• ls-id — Specifies the link state ID (LSID). (Range: IP address or an integer
in the range of 0–4294967295)
• adv-router — Display the LSAs that are restricted by the advertising
router. To specify a router, enter the IP address of the router.
• self-originate — Display the LSAs in that are self-originated.
• opaque-area— Display the area opaque LSAs.
• opaque-as— Display AS opaque LSAs.
• opaque-link— Display link opaque LSAs.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Information is only displayed if OSPF is enabled.
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.
Example
The following example displays information about the link state database
when OSPF is enabled.
console#show ip ospf database
Router Link States (Area 0.0.0.0)
Link Id Adv Router Age Sequence Chksm Options Rtr Opt
--------------- --------------- ----- -------- ------ ------- -----
5.2.0.0 0.0.0.0 1360 80000006 3a1f ------ -----
5.2.0.0 5.2.0.0 1360 80000009 a47e ------ ---E-
20.20.20.20 20.20.20.20 1165 8000000b 0f80 -E---- -----