Administrator Guide

Layer 3 Routing Commands 1781
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
---- -------- ---- -------- ----------------------- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:8E1 vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command to display information about the area.
Syntax
show ipv6 ospf area areaid
• areaid — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1