Administrator Guide

Layer 3 Routing Commands 1789
Area Border Router Count....................... 1
AS Border Router Count......................... 0
Area LSA Count................................. 6
IPv6 Address...................................
FE80::202:BCFF:FE00:3146/1283FFE::2/64
OSPF Interface Events.......................... 53
Virtual Events................................. 13
Neighbor Events................................ 6
External LSA Count............................. 0
LSAs Received.................................. 660
Originate New LSAs............................. 853
Sent Packets................................... 1013
Received Packets............................... 893
Discards....................................... 48
Bad Version.................................... 0
Virtual Link Not Found......................... 9
Area Mismatch.................................. 39
Invalid Destination Address.................... 0
No Neighbor at Source Address.................. 0
Invalid OSPF Packet Type....................... 0
Packet Type Sent Received
-------------------- ---------- ----------
Hello 295 219
Database Description 10 14
LS Request 4 4
LS Update 521 398
LS Acknowledgment 209 282
show ipv6 ospf interface vlan
Use the show ipv6 ospf interface vlan command to display OSPFv3
configuration and status information for a specific VLAN.
Syntax
show ipv6 ospf interface vlan {vlan-id | brief}
• vlan-id — Valid VLAN ID. Range is 1-4093.
• brief — Displays a snapshot of configured interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes