Administrator Guide

Switch Management Commands 1895
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the script file config.scr.
console#script show config.scr
interface gigabitethernet 1/0/1
ip address 176.242.100.100 255.255.255.0
exit
script validate
Use the script validate command to validate a script file by parsing each line
in the script file.The validate option is intended for use as a tool in script
development. Validation identifies potential problems though it may not
identify all problems with a given script.
Syntax
script validate scriptname
• scriptname — Name of the script file being validated. (Range: 1-31
characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.