Administrator Guide

Switch Management Commands 1902
The following list describes syntax keywords.
• source-url — The location URL or reserved keyword of the source file
being copied. (Range: 1–160 characters.)
• destination-url — The URL or reserved keyword of the destination file.
(Range: 1–160 characters.)
• ipaddr — The IPv4 or IPv6 address of the server.
• hostname — Hostname of the server. (Range: 1–158 characters). The
command allows spaces in the host name when specified in double
quotes.
• filepath — The path to the file on the server or USB drive or an absolute
or relative path on the switch. This is an optional parameter that should
only be entered if needed.
• filename — The name of the file on the server or USB drive (source-url).
The filename parameter is required for the tftp, ftp, scp, sftp, flash and
usb destination URLs. For an application, if the optional filename
parameter is given for an archive in the destination url, it must have a
.tar or .tgz extension. If the destination filename is not given, the
destination-url
(cont.)
openflow-ssl-cert An OpenFlow client certificate file. The
contents of the source URL are copied
into the of-cert.pem file on the switch.
script Downloads a configuration script by FTP,
SFTP, or TFTP.
startup-config Downloads a startup configuration file
using FTP or TFTP.
ias-users Downloads the ias-users database file.
Valid destination URLs for uploading from the switch:
tftp://{ipaddress | hostname}/filepath/filename
ftp://<user>@<ipaddr|hostname>/<path>/<filename>
scp://{user@ipaddresss | hostname}/filepath/filename
sftp://{user@ipaddress | hostname}/filepath/filename
flash://filename
usb://filepath/filename
Parameter Description