Administrator Guide

Switch Management Commands 1922
show dhcp lease
Use the show dhcp lease command to display IPv4 addresses leased from a
DHCP server.
Syntax
show dhcp lease [interface {out-of-band | vlan vlan-id}]
• out-of-band—The out-of-band interface.
• vlan-id—The VLAN identifier.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
This command lists all IPv4 addresses currently leased from a DHCP server
on an IP interface. This command only applies to IP interfaces. To see the
IPv4 address leased on the out-of-band interface, use the command
Maximum Next Hops.............................. 16 out-of-band.
This command output provides the following information.
Term Description
IP address, Subnet
mask
The IP address and network mask leased from the DHCP server.
DHCP Lease server The IPv4 address of the DHCP server that leased the address.
State State of the DHCPv4 Client on this interface.
DHCP transaction
id
The transaction ID of the DHCPv4 Client.
Lease The duration that the IP address was leased by the server.
Renewal The time when the next DHCP renew Request is scheduled to
renew the leased IP address.
Rebind The time when the DHCP Rebind process is scheduled.