Administrator Guide

Switch Management Commands 2045
show rmon alarm
Use the show rmon alarm command in User Exec mode to display alarm
configuration. Also see the rmon alarm command.
Syntax
show rmon alarm number
• number — Alarm index. (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays RMON 1 alarms.
console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
The following table describes the significant fields shown in the display: