Administrator Guide

Dell EMC Networking CLI 211
sFlow
SNMP
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
sflow destination Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
GC
sflow polling Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
GC
sflow polling (Interface
Mode)
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
IC
sflow sampling Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
GC
sflow sampling (Interface
Mode)
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
IC
sflow source-interface Selects the interface from which to use the IP
address inserted in the source IP address field of
transmitted sFlow packets.
GC
show sflow agent Displays the sflow agent information. PE
show sflow destination Displays all the configuration information
related to the sFlow receivers.
PE
show sflow polling Displays the sFlow polling instances created on
the switch.
PE
show sflow sampling Displays the sFlow sampling instances created
on the switch.
PE
show sflow source-interface Displays the assigned sFlow source interface. PE or
GC
Command Description Mode
a
show snmp Displays the SNMP status. PE
show snmp engineid Displays the SNMP engine ID. PE
show snmp filters Displays the configuration of filters. PE
show snmp group Displays the configuration of groups. PE