Administrator Guide

Switch Management Commands 2149
Example
The following example configures an SNMPv3 user “John” in group “user-
group”.
console(config)# snmp-server user John user-group
snmp-server view
Use the snmp-server view command in Global Configuration mode to create
or update a Simple Network Management Protocol (SNMP) server view entry.
To delete a specified SNMP server view entry, use the no form of this
command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view view-name [oid-tree ]
• view-name — Specifies the label for the view record that is being created
or updated. The name is used to reference the record. (Range: 1-30
characters.)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a
text string consisting of numbers, such as 1.3.6.2.4, or a word, such
as system. Replace a single subidentifier with the asterisk (*) wild card
to specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode