Administrator Guide

Switch Management Commands 2176
Example
console(config)#logging audit
logging buffered
Use the logging buffered command in Global Configuration mode to limit
syslog messages displayed from an internal buffer based on severity. To cancel
the buffer use, use the no form of this command.
Syntax
logging buffered [severity–level]
no logging buffered
• severity–level—(Optional) The number or name of the desired severity
level. Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]
Default Configuration
The default value for level is informational.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits
the commands displayed to the user. Debug level messages are intended for
use by support personnel. The output is voluminous, cryptic, and because of