Administrator Guide

Switch Management Commands 2177
the large number of messages generated, can adversely affect switch
operations. Only set the logging level to debug under the direction of support
personnel.
Example
The following example limits syslog messages collected in the internal buffer
to those of severity level “error” and above (numerically lower).
console(config)#logging buffered error
logging console
Use the logging console command in Global Configuration mode to limit
messages logged to the console based on severity. To disable logging to the
console terminal, use the no form of this command.
Syntax
logging console [severity–level]
no logging console
• severity–level—(Optional) The number or name of the desired severity
level. Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]
Default Configuration
The default console logging severity is emergencies.
Command Mode
Global Configuration mode