Administrator Guide

Switch Management Commands 2190
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the state of logging messages sorted in the
logging file.
console(config)#show logging file
Persistent Logging : enabled
Persistent Log Count : 0
--------------------------------------------------------------------------
Persistent Log File Empty
show syslog-servers
Use the show syslog-servers command to display the SYSLOG servers
settings.
Syntax
show syslog-servers
Default Configuration
When enabling x509 authentication, a default (non-indexed) certificate pair
is used if present and no index was selected for the server.
Anonymous authentication does not use a certificate.
The default SYSLOG server port number is 514. When DTLS is configured
(logging protocol 1), the default port number is 6514.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes