Administrator Guide

Switch Management Commands 2296
Example
console#unmount usb
Command History
Description updated in 6.4 release.
show usb
Use the show usb command to display the USB flash device details.
Syntax
show usb device
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec
User Guidelines
The following table explains the output parameters.
Parameter Description
Device Status This field specifies the current status of device.
• Active if device is plugged-in and the device is recognized by
the switch.
• Inactive if device is not mounted.
• Invalid if device is not present or invalid device is plugged-in.
Manufacturer Manufacturer details
Serial Number Serial number of the device.
USB Version
Compliance
Version of the USB device.
Class Code Device Class.
Subclass Code Device SubClass.