Administrator Guide

Using the CLI 249
Virtual Router
Config
From Global
Configuration
mode, use the ip vrf
command.
console(config-vrf-
XXX)#where XXX is the VRF
name.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode
Router RIP
Config
From Global
Configuration
mode, use the
router rip
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode
Router OSPFv3
Config
From Global
Configuration
mode, use the ipv6
router ospf
command.
console(config-rtr)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode
IPv6 DHCP Pool
Mode
From Global
Configuration
mode, use the ipv6
dhcp pool
command.
console(config-dhcp6s-
pool)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode
Interface Configuration Modes
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode