Administrator Guide

Layer 2 Switching Commands 329

Example

console#show isdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge,

S - Switch, H - Host, I - IGMP, r - Repeater

Device ID Intf Holdtime Capability Platform Port ID

------------------------ --------- --------- ---------- ---------------- ---------

CN0H784T2829841E0534A00 Gi1/0/13 163 R N3048 Gi1/0/13

R3 Gi1/0/16 157 R N3048 Gi1/0/16

console#show isdp neighbors detail

Device ID Switch

Address(es):

IP Address: 172.20.1.18

Capability Router IGMP

Platform cisco WS-C4948

Interface Gi1/0/1

Port ID GigabitEthernet1/1

Holdtime 162

Advertisement Version 2

Entry last changed time 0 days 00:55:20

Version:

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version

12.2(25)EWA9, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp traffic

The show isdp traffic command displays ISDP statistics.

Syntax

show isdp traffic

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged Exec mode, Global Configuration mode and all Configuration

submodes

User Guidelines

There are no user guidelines for this command.