Administrator Guide

Layer 2 Switching Commands 481
1 224.3.3.3 192.168.10.2 include Te1/0/1 4.4.4.4
VLAN Group Reporter Filter IIF Source Address
---- --------------------- ----------------- ------- ---------- -----------
1 224.2.2.2 192.168.10.2 include Te1/0/1 1.1.1.2
console(config)#show ip igmp snooping
Admin Mode..................................... Enable
IGMP Router-Alert check........................ Disabled
Multicast Control Frame Count.................. 6847
SSM FDB Capacity............................... 128
SSM FDB High Water Mark........................ 1
SSM FDB Current Entries........................ 1
Flooding Unregistered to All Ports............. Disabled
Vlan 1:
--------
IGMP Snooping Admin Mode....................... Enabled
Immediate Leave Mode........................... Disabled
Group Membership Interval...................... 260
Last Member Query Interval..................... 10
Multicast Router Expiry Time................... 300
Report Suppression Mode........................ Enabled
show ip igmp snooping mrouter
Use the show ip igmp snooping mrouter command to display information on
dynamically learned Multicast router interfaces.
Syntax
show ip igmp snooping mrouter
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes