Administrator Guide

Layer 2 Switching Commands 535
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier timer expiry 222
show ipv6 mld snooping querier
Use the show ipv6 mld snooping querier command to display MLD
Snooping Querier information. Configured information is displayed whether
or not MLD Snooping Querier is enabled.
Syntax
show ipv6 mld snooping querier [detail | vlan vlan-id]
• vlan-id — A VLAN identifier (Range: 1 - 4093)
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
When the optional argument vlan vlan-id is not used, the command shows
the following information:
Parameter Description
MLD Snooping Querier
Mode
Indicates whether or not MLD Snooping Querier is
active on the switch.
Querier Address Shows the IP Address which will be used in the IPv6
header while sending out MLD queries.
MLD Version Indicates the version of MLD that will be used while
sending out the queries. This is defaulted to MLD v1
and it can not be changed.