Administrator Guide

Security Commands 926
acct-port
Use the acct-port command to set the port on which the RADIUS accounting
server listens for connections. Use the no form of this command to reset the
port to the default.
Syntax
acct-port port
no acct-port
• port — The layer 4 port number of the accounting server (Range: 1 -
65535).
Default Configuration
The default value of the port number is 1813.
Command Mode
RADIUS Server Accounting mode
User Guidelines
There are no user guidelines for this command.
attribute 8 radius server attribute 4 radius server timeout
attribute 25 radius server attribute 6 retransmit
attribute 31 radius server attribute 8 show aaa servers
– radius server attribute 25 show radius statistics
authentication event fail
retry
radius server attribute 31 source-ip
auth-port radius server deadtime timeout
automate-tester radius server usage
deadtime radius server key
–
key radius server retransmit –
msgauth ––