Administrator Guide

Security Commands 981
18DBF225B2D4 4 - Upper 18DB-F225-B2D4
Command History
Command introduced in version 6.5 firmware.
dot1x max-reauth-req
Use the dot1x max-reauth-req command in Interface Configuration mode to
set the maximum number of times that the switch sends Extensible
Authentication Protocol EAP-Request/Identity frames to which no response is
received before restarting the authentication process. To return to the default
setting, use the no form of the command.
Syntax
dot1x max-reauth-req count
no dot1x max-reauth-req
• count — Number of times that the switch sends an EAP-Request/Identity
frame before restarting the authentication process. (Range: 1–20)
Default Configuration
The default value for the count parameter is 2.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command limits the number of EAP Request/Identity messages. Use the
dot1x max-req command to limit the number of EAP Request messages other
than EAP Request/Identity.
Command History
Command introduced in version 6.5 firmware.