Users Guide

344 Authentication, Authorization, and Accounting
Figure 9-12. 802.1X Example
The following example shows how to configure the example shown in
Figure 9-12.
1 Configure the RADIUS server IP address and a global shared secret
(secret).
console#configure
console(config)#radius server auth 10.10.10.10
console(config-auth-radius)#name Default-RADIUS-Server
console(config-auth-radius)#exit
console(config)#radius server key secret
console(config)#exit
2 Enable 802.1X port-based access control on the switch and configure and
enable voice VLAN.
console(config)#dot1x system-auth-control
console(config)#vlan 11
console(config-vlan11)#exit
console(config)#switchport voice vlan
Authentication Server
(RADIUS)
LAN
Dell EMC Networking
N-Series switch
Server
(Port 9)
Clients
(Ports 1 and 3)
Printer
(Port 7)
LAN Uplink
(Port 24)
Physically Unsecured Devices
Physically Secured Devices
Clients
(Port 8)