Administrator Guide

104 Hardware Overview
Dell Networking N1524P and N1548P
The Dell Networking N1524P and N1548P switches have an internal 600-watt
power supply feeding up to 24 PoE devices at full PoE+ power (500W). An
additional modular power supply (MPS1000) provides 1000 watts and gives
full power coverage for all 48 PoE devices (1500W).
CAUTION: Remove the power cable from the power supplies prior to removing
the power supply module itself. Power must not be connected prior to insertion in
the chassis.
Ventilation System
Two internal fans cool the Dell Networking N1500 Series switches.
Information Tag
The back panel includes a slide-out label panel that contains system
information, such as the Service Tag, MAC address, and so on.
LED Definitions
This section describes the LEDs on the front and back panels of the switch.
Port LEDs
Each port on a Dell Networking N1500 Series switch includes two LEDs. One
LED is on the left side of the port, and the second LED is on the right side of
the port. This section describes the LEDs on the switch ports.
100/1000/10000Base-T Port LEDs
Each 100/1000/10000Base-T port has two LEDs. Figure 3-4 illustrates the
100/1000/10000Base-T port LEDs.
NOTE: PoE power is dynamically allocated. Not all ports will require the full PoE+
power.