Administrator Guide

Default Settings 161
6
Default Settings
This section describes the default settings for many of the software features
on the Dell Networking N-Series switches.
Table 6-1. Default Settings
Feature Default
IP address DHCP on OOB interface, if equipped.
DHCP on VLAN1, if no OOB interface
Subnet mask None
Default gateway None
DHCP client Enabled on out-of-band (OOB) interface.
VLAN 1 Members All switch ports
SDM template Dual IPv4 and IPv6 routing
Users None
Minimum password length 8 characters
IPv6 management mode Enabled
SNTP client Disabled
Global logging Enabled
Switch auditing Disabled
CLI command logging Disabled
Web logging Disabled
SNMP logging Disabled
Console logging Enabled (Severity level: warnings and
above)
Monitor logging: Disabled
Buffer (In-memory) logging Enabled (Severity level: informational
and above)