Administrator Guide

Dell Networking Python Support 1659
CAUTION: The application install command has an auto-restart parameter. Do
NOT use this parameter while debugging or on any short-lived application. The
switch does NOT limit restarts and attempts to restart a failed application
immediately. Installing a failing or short-lived application with auto-restart enabled
will result in a switch that:
– cannot perform normal protocol operations at its advertised level.
– is difficult to access via the console.
The auto-restart parameter is recommended only for well-tested, stable
applications.
Execute the application in Privileged Exec mode using the application start
command and examine the results on the serial console.
console(config)#exit
console#application start app
Application started.
console#Hello World!
2.7.10 (default, Nov 6 2015, 14:45:45)
[GCC 4.8.2]
Please wait a moment while I gather a list of all available
modules...
BaseHTTPServer audioop io rfc822
Bastion base64 itertools rlcompleter
CGIHTTPServer bdb json robotparser
ConfigParser binascii keyword runpy
Cookie binhex libopenclt sched
DocXMLRPCServer bisect libospf select
HTMLParser bsddb libpam sets
MimeWriter cPickle libping sgmllib
OpEN cProfile libproc_libs sha
OpENUtil cStringIO librpcclt shelve
OpEN_py calendar libsock_agent shlex
Queue cgi libsshcompat shutil
SimpleHTTPServer cgitb libsshpam signal
SimpleXMLRPCServer chunk libtraceroute site
SocketServer cmath libvr_agent smtpd
StringIO cmd libvrf_init smtplib
UserDict code libz sndhdr
UserList codecs linecache socket
UserString codeop locale spwd