Administrator Guide

290 Authentication, Authorization, and Accounting
Figure 10-5. Configure Dot1x Settings
5 Click Apply .
To reauthenticate a port:
1
Open the Dot1x Authentication page.
2 Click Show All .
The
Dot1x Authentication Table displays.
3 Check Edit to select the Unit/Port to re-authenticate.
4 Check Reauthenticate Now .
5 Click Apply .
The authentication process is restarted on the specified port.
To reauthenticate multiple ports:
1
Open the Dot1x Authentication page.
2 Click Show All .
The
Dot1x Authentication Table displays.
3 Check Edit to select the Units/Ports to re-authenticate.
4 To re-authenticate on a periodic basis, set Periodic Re-Authentication to
Enable, and specify a
Re-Authentication Period for all desired ports.
5 To re-authenticate immediately, check Reauthenticate Now for all ports to
be re-authenticated.
6 Click Apply .
The authentication process is restarted on the specified ports (either
immediately or periodically).