Administrator Guide

Data Center Technology Commands 1162
User Guidelines
NOTE: This command is only available on N40xx series switches.
This command has no user guidelines.
Examples
console# show lldp tlv-select interface te1/0/1
Interface ETS Config ETS Recommend PFC App Priority QCN
------------ ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
console# show lldp tlv-select interface all
Interface ETS Config ETS Recommend PFC App Priority QCN
----------- ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
te1/0/2 No No Yes No Yes
show lldp dcbx
Use the show lldp dcbx command in Privileged Exec mode to display the
Traffic Class to Traffic Class Group mapping.
Syntax
show lldp dcbx [interface [all| interface-id detail|status]]
• interface-id —A valid physical interface specifier.
•
all —All interfaces.
•
detail —Display detailed DCBX information.
•
status —Display a status summary.
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec
User Guidelines
NOTE: This command is only available on N40xx series switches.
2CSNXXX_SWUM204.book Page 1162 Monday, January 25, 2016 1:25 PM