Administrator Guide

Layer 3 Routing Commands 1336

Command Mode

User Exec mode, Privileged EXEC mode, Global Config mode and all sub-

modes

User Guidelines

The following fields are displayed.

Command History

Introduced in version 6.2.0.1 firmware.

Modified in version 6.3.0.1 firmware.

Example

console# show bgp ipv6

BGP table version is 5, local router ID is 20.1.1.1

Status codes: s suppressed, * valid, > best, i - internal

Field Description

BGP table version Each time phase 2 of the BGP decision process runs to

select new BGP routes, this number is incremented.

Status codes

• s—The route is aggregated into an aggregate address

configured with the summary-only option

• *—Dell Networking BGP never displays invalid routes;

so this code is always displayed (to maintain

consistency with the industry standard)

• >—Indicates that BGP has selected this path as the

best path to the destination

•

—If the route is learned from an internal peer

Network IPv6 Destination prefix

Next Hop The route’s BGP next hop

Metric Multi-Exit Discriminator

LocPrf The local preference

Path The AS path

Origin The value of the Origin attribute

2CSNXXX_SWUM204.book Page 1336 Monday, January 25, 2016 1:25 PM