Administrator Guide

Dell Networking CLI 132
VLAN
udld message time Configures the interval between the
transmission of UDLD probe messages on
ports that are in the advertisement phase.
GC
udld timeout interval Configures the interval for the receipt of
ECHO replies.
GC
udld enable (Interface
Configuration)
Enables UDLD on a specific interface. IC
udld port Selects the UDLD operating mode on a
specific interface.
IC
show udld Displays the global settings for UDLD. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
interface vlan Enters the VLAN interface configuration mode. GC
interface range vlan Enters the interface configuration mode to
configure multiple VLANs.
GC
name (VLAN
Configuration)
Configures a name to a VLAN. IC
private-vlan Defines a private VLAN association
between the primary and secondary
VLANs.
VC
protocol group Attaches a vlan-id to the protocol-based VLAN
identified by
groupid .
VC
protocol vlan group Adds the Ethernet interface to the protocol-
based VLAN identified by
groupid .
IC
protocol vlan group all Adds all Ethernet interfaces to the protocol-
based VLAN identified by
groupid .
GC
show dot1q-tunnel Displays the QinQ status for each
interface.
PE
show interfaces switchport Displays switchport configuration. PE or
IC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 132 Monday, January 25, 2016 1:25 PM