Administrator Guide

Layer 3 Routing Commands 1390
Rx Data 0 3 0 500
RTO Notifications 0 4 0 1222
MIB Queries 0 0 0 5
show ip bgp update-group
This command reports the status of IPv4 outbound update groups and their
members.
Syntax
show ip bgp [vrf vrf-name ] update-group [ group-index | peer-address ]
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
•
group-index —(Optional) If specified, this option restricts the output to a
single update group.
•
peer-address —(Optional) If specified, this option restricts the output to
the update group containing the peer with the given IPv4 address.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
The update send history table show statistics on as many as the fifteen most
recent executions of the update send process for the update group. Items in
the history table are as follows:
Fields Description
Version The update version.
Delta T The amount of time elapsed since the update send
process executed. hours::minutes::seconds.
2CSNXXX_SWUM204.book Page 1390 Monday, January 25, 2016 1:25 PM