Administrator Guide

Dell Networking CLI 140
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
radius-server attribute 6 Enables the switch to send the RADIUS
Service-Type attribute in authentication
messages sent to the authentication server.
GC
radius-server attribute 8 Enables the switch to send the RADIUS
Framed-IP-Address attribute in
authentication messages sent to the
authentication server.
GC
radius-server attribute 25 Globally enables the switch to send the
RADIUS Class attribute as supplied by the
RADIUS server in accounting messages
sent to the accounting server.
GC
radius-server attribute 31 Globally enables the switch to send the
RADIUS Class attribute as supplied by the
RADIUS server in accounting messages
sent to the accounting server.
GC
radius-server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 140 Monday, January 25, 2016 1:25 PM