Administrator Guide

Dell Networking CLI 164
show bgp ipv6 neighbors
advertised-routes
Displays IPv6 routes advertised to a
specific neighbor.
PE
show bgp ipv6 neighbors
policy
Displays the inbound and outbound IPv6
policies configured for a specific peer.
PE
show bgp ipv6 neighbors
received-routes
Displays a list of IPv6 routes received from
a specific neighbor.
PE
show bgp ipv6 statistics Displays statistics for the IPv6 decision
process.
UE,
PE,
GC
show bgp ipv6 summary Displays a summary of BGP configuration
and status.
UE,
PE,
GC
show bgp ipv6 update-group Reports the status of IPv6 outbound
groups and their members.
PE
show bgp ipv6 route-
reflection
Displays a summary of BGP route
reflection.
PE
show ip bgp Uses the show ip bgp command in
Privileged Exec mode.
UE
show ip bgp aggregate-
address
Lists the aggregate addresses that have
been configured and indicates whether
each is currently active.
PE
show ip bgp community Displays a BGP community. PE
show ip bgp community-list Lists the routes that are allowed by the
specified community list.
PE
show ip bgp extcommunity-
list
Displays all the permit and deny attributes
of the given extended community list.
PE,
GC
show ip bgp listen range Displays information about IPv4 BGP listen
ranges.
PE
show ip bgp neighbors Shows details about BGP neighbor
configuration and status.
UE
show ip bgp neighbors
advertised-routes
Displays the list of routes advertised to a
specific neighbor.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 164 Monday, January 25, 2016 1:25 PM