Administrator Guide

Layer 3 Routing Commands 1674
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip pim boundary all
MULTICAST BOUNDARY
Interface Group IP Mask
-------- ------ ---------------
show ip multicast interface
Use the show ip multicast interface command in Privileged Exec mode to
display the multicast information for the specified interface.
Syntax
show ip multicast interface [ type number ]
• type number —Interface type and number for which to display IP
multicast information. VLAN Vlan-ID is the only supported type and
number.
Default Configuration
Show information for all multicast interfaces.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast information for VLAN 15.
console#show ip mcast interface vlan 15
Interface TTL
--------- -----
Vl15 1
2CSNXXX_SWUM204.book Page 1674 Monday, January 25, 2016 1:25 PM