Administrator Guide

Layer 3 Routing Commands 1702
console#show ipv6 mroute group FF43::5 summary
Multicast Route Table Summary
Source IP Group IP Protocol IIF OIF Expiry
--------------- --------------- -------- --------- --------- -------
* FF43::5 PIMSM Vl11
Vl13
2001::5 FF43::5 PIMSM Vl12 Vl11
Vl13
show ipv6 mroute group
Use the show ipv6 mroute group command in Privileged Exec mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
groupipaddr value.
Syntax
show ipv6 mroute group groupipaddr [summary]
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mroute group FF43::5 ?
<cr> Press enter to execute the command.
| Output filter options.
summary Display the IPV6 multicast routing table summary.
2CSNXXX_SWUM204.book Page 1702 Monday, January 25, 2016 1:25 PM