Administrator Guide

Layer 3 Routing Commands 1877
show ip rip
Use the show ip rip command in Privileged Exec mode to display information
relevant to the RIP router.
Syntax
show ip rip
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information relevant to the RIP router.
console#show ip rip
RIP Admin Mode................................. Enable
Split Horizon Mode............................. Simple
Auto Summary Mode.............................. Enable
Host Routes Accept Mode........................ Enable
Global route changes........................... 0
Global queries................................. 0
Default Metric................................. 12
Default Route Advertise........................ 0
Redistributing.................................
Source......................................... Connected
Metric......................................... 2
Distribute List................................ Not configured
Redistributing.................................
Source......................................... ospf
Metric......................................... 10
Match Value.................................... 'nssa-external 1'
Distribute List................................ Not configured
2CSNXXX_SWUM204.book Page 1877 Monday, January 25, 2016 1:25 PM