Administrator Guide

Switch Management Commands 2118
Model Level Read Write Notify
----------------- ----- ------ -------- -------- ------
user-group V3 Auth-Priv Default "" ""
managers-group V3 NoAuth-priv Default Default ""
managers-group V3 NoAuth-priv Default "" ""
console# show snmp groups user-group
Name Security Views
Model Level Read Write Notify
----------------- ------ ------ -------- -------- -------
user-group V3 Auth-Priv Default "" ""
show snmp user
Use the show snmp user command in Privileged Exec mode to display the
configuration of users.
Syntax
show snmp user [ username ]
• username — Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
The user name accepts any printable characters except a question mark.
Enclose the string in double quotes to include spaces within the name. The
surrounding quotes are not used as part of the name. The CLI does not filter
illegal characters and may accept entries up to the first illegal character or
reject the entry entirely.
Example
The following example displays the configuration of users with the user name
specified.
2CSNXXX_SWUM204.book Page 2118 Monday, January 25, 2016 1:25 PM