Administrator Guide

Switch Management Commands 2152
SupportAssist EULA has not been accepted.
SupportAssist cannot be configured until the SupportAssist EULA is accepted.
console(config)#
url
Use the url command to configure the URL to reach on the Dell
SupportAssist remote server. Use the no form of the command to remove the
URL information.
Syntax
url uniform-resource-locator
no url
uniform-resource-locator — A text string for the URL using one of the
following formats:
http://[username:password@]<hostip>:<portNum>/<filepath>
https://[username:password@]<hostip>:<portNum>/<filepath>
Default Configuration
By default, no URL is configured.
Command Mode
Support Assist Configuration
User Guidelines
The hostip for the server may be specified as an IPv4 address, an IPv6 address
or as a DNS hostname. If using the DNS hostname, the DNS resolver feature
will need to be configured, enabled and operational.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config)# support-assist
console(conf-support-assist)#server default
2CSNXXX_SWUM204.book Page 2152 Monday, January 25, 2016 1:25 PM