Administrator Guide

Switch Management Commands 2213
Example
console#show checkpoint statistics
Messages Checkpointed.....................6708
Bytes Checkpointed........................894305
Time Since Counters Cleared...............3d 01:05:09
Checkpoint Message Rate...................0.025 msg/sec
Last 10-second Message Rate...............0 msg/sec
Highest 10-second Message Rate............8 msg/sec
show cut-through mode
Use the show cut-through mode command to show the cut-through mode on
the switch.
Syntax
show cut-through mode
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
Default Configuration
This command has no default configuration.
User Guidelines
Not available on N1500, N2000 or N3000 switches.
Example
Console#show cut-through mode
Current mode : Enable
Configured mode : Disable (This mode is effective on next reload)
show hardware profile
Use the show hardware profile command in Privileged EXEC mode to display
the hardware profile information for the 40G ports. The user can optionally
specify an interface or all 40G interfaces are displayed.
2CSNXXX_SWUM204.book Page 2213 Monday, January 25, 2016 1:25 PM