Administrator Guide

Switch Management Commands 2273
console(config-time-range)#periodic wednesday 12:30 to thursday 20:00
console(config-time-range)#periodic weekend 18:00 to 20:00
show time-range
Use the show time-range command in Privileged Exec mode to display a time
range and all the absolute/periodic time entries that are defined for the time
range. The [name] parameter is used to identify a specific time range to
display. When the [name] parameter is not specified, all the time ranges
defined in the system are displayed.
Syntax
show time-range [name]
name
—A
specific time range to display
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
This command outputs the following.
Parameter Description
Number of Time
Ranges
Number of time ranges configured in the system.
Time Range Name Name of the time range.
Time Range Status Status of the time range(active/inactive).
Absolute start Start time and day for absolute time entry.
Absolute end End time and day for absolute time entry.
Periodic Entries Number of periodic entries in a time-range.
Periodic start Start time and day for periodic entry.
2CSNXXX_SWUM204.book Page 2273 Monday, January 25, 2016 1:25 PM