Administrator Guide

Using the CLI 238
Global
Configuration
From Privileged
Exec mode, use the
configure
command.
console(config)#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
Privileged Exec
mode.
Line Interface From Global
Configuration
mode, use the line
command.
console(config-line)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
BGP Router
Configuration
From Global
Configuration
mode, use the
router bgp
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
IPv6 Address
Family
Configuration
From BGP Router
Configuration
mode, use the
address-family ipv6
command.
console (config-router-af)#
To exit to BGP
Router
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSNXXX_SWUM204.book Page 238 Monday, January 25, 2016 1:25 PM