Administrator Guide

Layer 2 Switching Commands 323
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
The information displayed varies based upon the information received from
the ISDP neighbor.
Example
console#show isdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge,
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Intf Holdtime Capability Platform Port ID
------------------------ --------- --------- ---------- ---------------- ---------
CN0H784T2829841E0534A00 Gi1/0/13 163 R N3048 Gi1/0/13
R3 Gi1/0/16 157 R N3048 Gi1/0/16
console#show isdp neighbors detail
Device ID Switch
Address(es):
IP Address: 172.20.1.18
IP Address: 172.20.1.18
Capability Router IGMP
Platform cisco WS-C4948
Interface Gi1/0/1
Port ID GigabitEthernet1/1
Holdtime 162
Advertisement Version 2
Entry last changed time 0 days 00:55:20
Version :
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version
12.2(25)EWA9, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 21-Mar-07 12:20 by tinhuang
show isdp traffic
The show isdp traffic command displays ISDP statistics.
Syntax
show isdp traffic
2CSNXXX_SWUM204.book Page 323 Monday, January 25, 2016 1:25 PM