Administrator Guide

Layer 2 Switching Commands 412
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet
unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port Description
---- ------------------------------------------------
Gi1/0/1 Port that should be used for management only
Gi2/0/1
Gi2/0/2
Port Description
----- ----------------------------------------------------------------------
Po1
show interfaces detail
Use the show interfaces detail command in Privileged Exec mode to display
detailed status and configuration of the specified interface.
Syntax
show interfaces detail interface-id
• interface-id — An Ethernet interface identifier or port channel identifier.
2CSNXXX_SWUM204.book Page 412 Monday, January 25, 2016 1:25 PM